A pack of 4 RC wheels adapters to allow 1/10th, 1/8th and even 1/5th scale RC wheels to fit onto standard Lego wheel hubs and our own metal bearing wheel hubs.
Upgrade your MOC model with the more realistic wheels and endless design choices.
Spacers will increase wheel offset (approximately 1 stud but depends on RC wheel).
Pack of 4 adapters for each wheel size.
- 1:10th scale = 12mm hex
- 1:8th scale = 17mm hex
- 1:5th scale =24mm hex
No wheels or hubs included.
Customer Reviews
Hi
I was very pleased with the wheel adapters, nicely made and a good fit on the hub. My problem was that when I tried to clamp the hub onto the metal drive shaft using the 2 set screws. Because the hole in the rotating part of the hub is quite a loose fit I could not get the wheel to rotate without wobbling. I wrote to Kristian about this and with his help I have found a solution which works but is a bit of a bodge. Using the set screws also tends to throw up a burr on the shaft which makes it difficult to dis-assemble.
In my opinion if the hole in the rotating part of the hub was broached with a Lego spline the setup would work perfectly.
If a lego wheel is used with the hub without the adapter the setup works well as the drive shaft uses the spline on the wheel and not the set screws.
Many thanks
Helen
Buen producto y muy bien fabricado. No supone un aumento de peso considerable aunque se debe tener en cuenta a la hora de diseñar ejes y dirección. Ajuste perfecto entre ruedas RC y ejes LEGO. Recomendado.